Service
ELV
Hanwha and Hikvision CCTV; access control; Unify PBX.
Scope of work
- 01Survey and design of ELV systems integrated into the network
- 02Camera placement, field-of-view and storage capacity design
- 03IP camera installation and configuration (dome, bullet, PTZ, fisheye)
- 04NVR/VMS deployment for centralised recording and management
- 05Access control deployment (readers, controllers, electromagnetic locks)
- 06Event-based integration of access control with CCTV
- 07Unify OpenScape Business IP PBX deployment
- 08Extension, IVR, voicemail, SIP trunk configuration and hotel PMS integration
- 09Dedicated VLAN per ELV system
- 10Documentation: camera map, door map, extension list
The most common failure I have seen in ELV projects is equipment bought and installed before the network was designed. IP cameras sitting on the same VLAN as staff computers. PoE switches under-sized so cameras restart at random. Bandwidth never calculated so the recorder drops frames when many cameras record at high resolution at once. The system runs for a few months and then starts failing in ways that are hard to trace.
What is ELV — and why is it the security and operations layer of a building?
ELV (Extra Low Voltage) covers the low-voltage systems in a building: CCTV, access control, telephony and similar systems. They run continuously 24/7, usually invisible to users in normal conditions, yet they are the most critical systems when something goes wrong. Today these systems all run on IP networks, so correct ELV design starts from the network drawing, not the equipment list.
IP cameras — correct design matters more than brand choice
IP cameras connect to the LAN and send compressed video (H.264/H.265) to an NVR or VMS. Distance is no longer a limit: a camera anywhere in the building reaches the central storage over the network switch. Hanwha Vision is strong in AI video analytics such as people counting and zone intrusion detection. Hikvision is widely used for its reasonable cost and broad device ecosystem.
But a good camera system does not start with picking a brand. It starts with questions: is each position for general observation, identifying people or reading plates? What are the lighting conditions, is there backlight? How many days of footage must be kept? Only then can camera type, resolution, storage capacity and bandwidth be calculated. And only then can the PoE budget the switch must deliver be worked out.
NVR and VMS — the centre of video management
An NVR is a dedicated recorder, a VMS is management software running on a server, suited to large systems with many cameras and many viewing points. A VMS provides live viewing, search by time and event, user permission control, evidence export and multi-site management from one place.
Isolating cameras on the network
IP cameras run embedded firmware that is rarely patched on a regular basis, so I always place them in a dedicated VLAN, separate from user networks and allowed to talk only to the recording server. This reduces cyber risk and protects bandwidth for other systems.
Access control — who goes where, and when
An access control system manages movement in a building: main entrances, server rooms, restricted areas, lifts. Core components are a card or biometric reader at the door, a controller that makes the allow or deny decision, an electromagnetic lock, and central management software to assign permissions and review history.
Integrating access control with CCTV
When the two systems are integrated, each access event is linked to a video clip. A rejected card, a door held open too long, someone entering at midnight: the manager clicks the event and sees the footage from that moment, instead of searching archives for hours. This is the greatest value of integration over installing two separate systems.
Unify OpenScape Business IP PBX
An IP PBX replaces the analog telephone system. All internal and external calls travel over the IP network, desk phones plug into the LAN, and no separate telephone cabling is needed. I configure extension numbers for each desk phone and softphone, IVR for automated answering and routing, voicemail, call recording and SIP trunk connection to the carrier. Voice traffic needs QoS prioritisation on the network so call quality holds when the network is busy.
PMS integration for hotels
In a hotel, the PBX connects to the property management system (PMS). When the front desk checks a guest in, the room extension is activated; at check-out voicemail is reset and the room status restored. Call charges are billed per room and Do Not Disturb can be set from the front desk. This integration turns the PBX from a telephone system into part of the hotel's operating workflow.
When does an ELV system need redesigning?
When camera images are blurry or drop out, when CCTV, access control and telephony run as separate islands, when a building expands or upgrades from analog to IP, or when integration with a PMS or other management systems is needed.